SHS / Rocket Airsoft Air Nozzle for Marui / Echo1 M14
G&G Hop Bucking - Cold Resistant
The G&G hop bucking is a great all around bucking for range and accuracy. This bucking seals well and works great both as a drop in replacement for a stock bucking, or modified to use as a flat hop bucking. Includes: 1 bucking, 1 nub, 1 barrel ring Works well in hot or cold temperatures *Upgrading / repairing airsoft guns should only be...
G&P Hop Bucking & Nub
G&P makes a great inexpensive hop up bucking that just drops into most AEG's and HPA systems. If you're in need of a low profile bucking to modify for your flat hop or r-hop, this is a great choice. The thinner walls prevent stretching while installing in tighter hop units like KWA's, and they seal very well against the air nozzle. Includ...
Maple Leaf Rubber Hop Bucking w/ Tensioner 70*
The Maple Leaf 70 degree hop bucking is a great drop in bucking to increase range and accuracy while maintaining a tight air seal in the hop unit. The specially designed tensioner (included) has a concave face to help create even pressure on the bucking and bb to improve shot consistency while allowing the shooter to use heavier BBs and achieve...
Modify Baton Ryusoka Hop Bucking (Soft)
Modify answered the call when players asked for an easy to install flat hop bucking. No longer do you need to "modify" your current hop bucking. Just install this like you would any other hop bucking and nub combo and you're on your way. We suggest using these with BB weights of at least .30g for the bet possible performance as lighter weight...
Modify Cut Off Lever (V2)
SHS / Rocket Airsoft AK Air Nozzle
SHS / Rocket Airsoft Air Nozzle for M16 / M4
SHS / Rocket Airsoft SCAR-L Air Nozzle
SHS / Rocket Airsoft Steel Gears - 16:1 Ratio
SHS 16:1 high speed gears allow you to increase your rate of fire with minimal loss of trigger response. Pair these steel gears with a SHS high torque motor and a lipoly battery and you can have the best of both trigger response and rate of fire. These are one of the best upgrades you can install to improve the reliability of your AEG. 16:1 H...
SHS / Rocket Airsoft Steel Gears - 18:1 Ratio
These are one of the best upgrades you can install to improve the reliability of your AEG. Properly installed, these run great even when powered by a lipoly battery. NOTE: These may be packaged as SHS or Rocket Airsoft but they are always SHS OEM gears.
SHS AEG Cylinder for 350-450mm Inner Barrels
It's important to use the correct volume cylinder with your barrel to maximize your FPS and efficiency. A cylinder that is ported too far forward or too far back can cause your FPS to drop dramatically. Polished Steel construction Ported for AEG's with inner barrels from 350-450 mm in length Fits most AEG's Note: May be packaged as SHS or Ro...
SHS Cut Off Lever (V3)
The SHS cut off lever is a simple upgrade and one that is often overlooked. Most AEG's use a cut off lever made of a mix of poor quality metals instead of steel, and they wear out fast. If you prefer semi-auto, you'll put more wear and tear on the cut off lever, and this is a simple inexpensive upgrade that will improve the reliability of your...