AEG Parts

Sort by:
Sold Out

G&G Hop Bucking - Cold Resistant

$ 6.49

The G&G hop bucking is a great all around bucking for range and accuracy.  This bucking seals well and works great both as a drop in replacement for a stock bucking, or modified to use as a flat hop bucking.   Includes: 1 bucking, 1 nub, 1 barrel ring Works well in hot or cold temperatures *Upgrading / repairing airsoft guns should only be...


More Info

G&P Hop Bucking & Nub

$ 9.99

G&P makes a great inexpensive hop up bucking that just drops into most AEG's and HPA systems.  If you're in need of a low profile bucking to modify for your flat hop or r-hop, this is a great choice.  The thinner walls prevent stretching while installing in tighter hop units like KWA's, and they seal very well against the air nozzle. Includ...


More Info
Sold Out

Maple Leaf Rubber Hop Bucking w/ Tensioner 70*

$ 14.95

The Maple Leaf 70 degree hop bucking is a great drop in bucking to increase range and accuracy while maintaining a tight air seal in the hop unit.  The specially designed tensioner (included) has a concave face to help create even pressure on the bucking and bb to improve shot consistency while allowing the shooter to use heavier BBs and achieve...


More Info
Sold Out
Packaging for the Modify Baton Ryusoka flat hop bucking and nub combo for airsoft AEG.
Packaging for the Modify Baton Ryusoka flat hop bucking and nub combo for airsoft AEG.

Modify Baton Ryusoka Hop Bucking (Soft)

$ 14.00

Modify answered the call when players asked for an easy to install flat hop bucking.  No longer do you need to "modify" your current hop bucking.  Just install this like you would any other hop bucking and nub combo and you're on your way.  We suggest using these with BB weights of at least .30g for the bet possible performance as lighter weight...


More Info

Modify Cut Off Lever (V2)

$ 10.00


More Info
SHS / Rocket Airsoft  AK Air Nozzle

SHS / Rocket Airsoft AK Air Nozzle

$ 4.99


More Info
SHS / Rocket Airsoft Air Nozzle for M16 / M4

SHS / Rocket Airsoft Air Nozzle for M16 / M4

$ 4.99


More Info

SHS / Rocket Airsoft Air Nozzle for Marui / Echo1 M14

$ 7.99

Air nozzles wear out and leak air pressure eventually, and if you bought a CYMA / Echo1 M14, it's likely been leaking air since the day you bought it.  The SHS M14 air nozzle is machined from aluminum and has a rubber o-ring to maintain a tight air seal helping maintain a consistent FPS in your airsoft gun.   Compatible with Marui and CYMA M14'...


More Info

SHS / Rocket Airsoft SCAR-L Air Nozzle

$ 7.50


More Info

SHS / Rocket Airsoft Steel Gears - 16:1 Ratio

$ 20.00

SHS 16:1 high speed gears allow you to increase  your rate of fire with minimal loss of trigger response.  Pair these steel gears with a SHS high torque motor and a lipoly battery and you can have the best of both trigger response and rate of fire. These are one of the best upgrades you can install to improve the reliability of your AEG. 16:1 H...


More Info
SHS / Rocket Airsoft Steel Gears - 18:1 Ratio

SHS / Rocket Airsoft Steel Gears - 18:1 Ratio

$ 20.00

These are one of the best upgrades you can install to improve the reliability of your AEG.  Properly installed, these run great even when powered by a lipoly battery.   NOTE: These may be packaged as SHS or Rocket Airsoft but they are always SHS OEM gears.


More Info

SHS AEG Cylinder for 350-450mm Inner Barrels

$ 10.00

It's important to use the correct volume cylinder with your barrel to maximize your FPS and efficiency.  A cylinder that is ported too far forward or too far back can cause your FPS to drop dramatically.   Polished Steel construction Ported for AEG's with inner barrels from 350-450 mm in length Fits most AEG's Note: May be packaged as SHS or Ro...


More Info

SHS Cut Off Lever (V3)

$ 4.99

The SHS cut off lever is a simple upgrade and one that is often overlooked.  Most AEG's use a cut off lever made of a mix of poor quality metals instead of steel, and they wear out fast.  If you prefer semi-auto, you'll put more wear and tear on the cut off lever, and this is a simple inexpensive upgrade that will improve the reliability of your...


More Info

SHS Cut Off Lever Version 2

$ 4.99

The SHS cut off lever is a simple upgrade and one that is often overlooked.  Most AEG's use a cut off lever made of a mix of poor quality metals instead of steel, and they wear out fast.  If you prefer semi-auto, you'll put more wear and tear on the cut off lever, and this is a simple inexpensive upgrade that will improve the reliability of your...


More Info

SHS Full Cylinder for AEG with 455mm-510mm inner barrel

$ 10.00

It's important to use the correct volume cylinder with your barrel to maximize your FPS and efficiency.  A cylinder that is ported too far forward or too far back can cause your FPS to drop dramatically.   Polished Steel construction Full Type 0 Cylinder for AEG's with barrels 450mm or longer Fits most AEG's


More Info
SHS V2 / V3 Anti-Reversal Latch

SHS V2 / V3 Anti-Reversal Latch

$ 6.00

This anti-reversal latch by SHS is all steel and a great upgrade to replace a worn out or broken anti-reversal latch in your version 2 or version 3 gearbox.   All steel construction Includes 1 latch and 1 spring Fits Version 2 and Version 3 gearboxes (may fit others as well)


More Info
SHS V2 Cylinder Head

SHS V2 Cylinder Head

$ 9.99

shs v2 cylinder head


More Info
Sold Out

SHS Version 7 Steel Gears - M14

$ 24.99

The SHS version 7 steel gears are the best bang for the buck when it comes to replacing the gears in a Marui style M14 gearbox.  These feature the same steel and reliability that the rest of the SHS family of gears provide, but are built to fit version 7 gearboxes.


More Info

Sorbothane Padding (Service Center Only)

$ 2.99

Sorbothane padding for cylinder heads and "angle of engagement" correction.


More Info